Grilling ribs on charcoal can be a wonderful way to infuse great barbecue flavor into your meat. Unfortunately, the process can be quite time-consuming with traditional charcoal grilling, but it doesn’t have to be. In this article, I’ll show you how to grill ribs on charcoal fast, using simple tips to streamline the cooking process without sacrificing flavor.
First, let’s discuss the type of charcoal to use. While there are many types of charcoal, my recommendation for achieving a quick cook time is to use lump charcoal. It burns hotter and is less dense than other types, meaning it reaches cooking temperature in less time. Additionally, it doesn’t contain any chemicals or additives, making it a healthier option and allowing the flavor of the ribs to shine through.
Another tip for quick grilling is to apply indirect heat. This means keeping the heat source on one side of the grill and the ribs on the other. This will help ensure your ribs cook evenly without overcooking. Finally, pre-cooking the ribs in the oven briefly before placing them on the grill can help speed up the cooking time.
By following these simple tips, you’ll have perfectly grilled ribs in no time. Just keep an eye on the temperature and cooking time to ensure your ribs are perfectly cooked, but still moist and tender. So, let’s fire up the grill and get cooking!
Prepping The Ribs
If you want to know how to grill ribs on charcoal fast, the first step is to properly prep the ribs. Here are a few easy steps to get you started.
1. Remove the Membrane: The tough membrane on the underside of the ribs needs to be removed before grilling. Use a sharp knife to carefully loosen the edge of the membrane and then grab it with a paper towel and pull it off.
2. Trim the Fat: Trimming the fat will help the ribs cook more evenly. Use a sharp knife to remove any large pieces of fat.
3. Season the Ribs: Season the ribs with your favorite spices or rub, and coat both sides evenly. You can also marinate the ribs overnight for more flavor.
4. Bring the Ribs to Room Temperature: Allow the ribs to sit at room temperature for 30 minutes before grilling. This will help them cook more evenly.
5. Preheat the Grill: Preheat your grill to medium-high heat and make sure the grates are clean.
Following these simple steps, perfectly prepped ribs are ready for the grill. Remember, the key to grilling ribs on charcoal fast is to properly prep them first.
How To Grill Ribs On Charcoal Fast
When it comes to grilling ribs on charcoal, starting the grill may seem like a daunting task. However, you can get your grill up and running quickly with the right technique. Here’s how to start the charcoal grill quickly and efficiently:
1. Gather your supplies. Make sure you have all the necessary tools and supplies, including charcoal briquettes, a chimney starter, lighter fluid, matches, and a grill grate.
2. Prepare the charcoal. Fill the chimney starter with charcoal briquettes and add a few crumpled pieces of newspaper to the bottom. Light the newspaper with a match and wait for the charcoal to heat up. This should take around 10-15 minutes.
3. Spread the charcoal. Once the charcoal is hot, spread it out evenly across the bottom of the grill. Use long-handled tongs to arrange the pieces so that they are in a single layer and spread out uniformly. This will ensure that the heat is distributed evenly throughout the grill.
4. Add the grill grate. Once you’ve spread the charcoal, add the grill grate. Ensure it is placed securely so it won’t shift or fall off during cooking.
5. Let the grill heat up. Allow the grill to heat up for 5-10 minutes before adding the ribs. This will ensure the grill is hot enough to cook the ribs properly.
Following these steps, you can quickly and easily start your charcoal grill. Once the grill is hot, you can start grilling delicious ribs. The next section will cover the best methods for grilling ribs on charcoal quickly and efficiently.
When grilling ribs on charcoal, there’s something special about the smell of smoke on succulent, juicy meat. However, sometimes you don’t have all the time in the world to wait for your ribs to cook slowly. That is why in this section, I’ll share some tips on grilling ribs on charcoal fast and efficiently.
Timing is key when it comes to grilling ribs on charcoal quickly, so make sure to keep track of the timing and temperature. Follow these steps to ensure your ribs are cooked evenly and in good time.
1. Start by preparing your ribs. Remove the membrane from the back of the ribs and apply a dry rub generously all over the meat. Allow the ribs to sit for 10-15 minutes while you prepare your charcoal grill.
2. Light your charcoal grill and wait until the coals glow red. Then, create an indirect cooking zone by pushing the coals to one side of the grill.
3. Once the grill is hot enough, place your ribs away from the coals on the opposite side of the grill. This will allow the ribs to cook using the indirect heat and avoid burning.
4. Cover the grill with the lid and let the ribs cook undisturbed for approximately 20 minutes. Keeping the lid closed is essential to maintain an even temperature and prevent flare-ups.
5. After 20 minutes, flip the ribs over and cook for an additional 20 minutes. Check the internal temperature of the ribs using a meat thermometer to ensure that it has reached an internal temperature of 145°F.
6. Once the ribs have reached the desired temperature, it’s time to add your BBQ sauce. Move the ribs over to the hot coals and apply a layer of your favorite BBQ sauce on both sides. Cook the ribs for 5-7 minutes, continually turning them over to avoid burning.
7. Remove the ribs from the grill and let them rest for a few minutes before serving.
By following these steps on how to grill ribs on charcoal fast, you’ll have perfect ribs in no time. Remember that timing and temperature are key; always use a meat thermometer to check for doneness. With a bit of practice, you’ll find that you can cook delicious ribs efficiently and quickly every time.